39
OPERATING the FIREPLACE
Element4 Gas Fireplaces
European
Home
.com
BEFORE THE FIRST FIRE
1. Make certain that all construction materials have been removed from inside and around the fireplace and the fireplace has
been cleaned of any construction dust.
2. Confirm that the gas valve is properly connected and bled.
3. Check the gas supply for leaks and proper pressure.
4. Check that the venting is unobstructed and in proper working condition.
5. PROPERLY PLACE, CLAMP, AND SEAL THE GLASS PANELS.
6. Place the three AAA batteries into the remote control and confirm that it will communicate with the receiver by pressing
the
ON
/
OFF
. (See Figure 38) If necessary pair the remote and receiver, below.
7. Follow
USING THE REMOTE CONTROL ELECTRONIC IGNITION SEQUENCE
to setup and use remote.
THIS PART WAS INTENTIONALLY LEFT
BLANK
