56
© 2006, Elektro-Automatik GmbH & Co. KG
Irrtümer und Änderungen vorbehalten
EN
Operating Guide
PSI 8000 3U HS PV Series
Date: 20-05-2016
Using the power supply
7.
Device configuration
Part 1: The menu
Profile
This is an overview of the parameter
pages, starting from the menu
Profile
.
The red colored menu is only displayed if
the option „internal resistance“ is unlocked.
+
P
The profiles are intended to minimize to time needed to set up
the device at alternating users or to keep user defined settings
for repeating applications. The last used profile is always loaded
after the unit is switched on.
The menu entry
Profile
leads you to following selection:
General settings
Supervision
Load profile
Save profile
General se
The menu entry
General settings
leads to following se-
lection where the operation mode, the display itself and the
handling (adjustment) of the unit can be configured:
Setup operation mode
Preset list
Adjust limits
Control panel
Display
Super
The menu entry
Supervision
leads to following selection
where alarms, warnings and signals, as well as the correspond-
ing supervision limits and reaction times are set up.
U thresholds
I thresholds
Step response
Load p
Load profile from user profile = {default, 1..4}
The current profil is replaced by the selected one.
Save p
Save profile to user profile = {1..4}
The current profile can be stored into one out of four profiles.
