ELEKTRA Crema Caffe, Instruction Manual

Page: 50 / 68

50
WATER SOFTENER CONNECTION (A-K with WTS)
The machine must only be used with the three types of special water softener supplied
by ELEKTRA, i.e.:
- 8-litre ELEKTRA water softener
- 12-litre ELEKTRA water softener
- 16-litre ELEKTRA water softener
No other type or brand of water softener may be used with this model .
1) Connect the flexible pipe connected to coupling “1” on the machine
to the corresponding coupling “1” on the water softener.
2) Connect the flexible pipe connected to coupling “2” on the machine
to the corresponding coupling “2” on the water softener.
Do not open the water supply.
CONNECTION WITHOUT WATER SOFTENER (A-K with WTS)
Although not recommended, the machine can be used without water softener if necessary.
DRAIN CONNECTION (A-S-K-C)
The machine has two rubber connecting pipes, one of 20 mm in external diameter
and the other of 18 mm in external diameter, both approx. 1.5 metres in length.
This flexible pipes must be made to flow into a fixed drain manifold with a minimum
internal diameter of 50 mm located underneath the machine work counter.
The space created by difference in diameter of the two pipes inserted into the drain
manifold must be left free for the venting of air during the discharging of the water.
1) Hook up the rubber pipe of 20 mm in diameter between the pipe fitting on the plastic
drain box installed at the bottom of the machine to the drain manifold located
underneath the counter, ensuring that it does not sag and that it is not strangled.
2) Hook up the rubber pipe of 18 mm in diameter between the metal pipe fitting
on the bottom of the machine to the drain manifold located underneath the counter,
ensuring that this too does not sag and that it is not strangled.
5
6
7