ELEKTRA Crema Caffe, Instruction Manual

Page: 54 / 68

54
BASIC PROGRAMMING BY THE MAINTENANCE TECHNICIAN (S-C-B)
This enables the implementation of some of the Adjustment and Maintenance
functions listed below.
It also facilitates the providing of telephonic assistance.
Basic Programming is the exclusive responsibility of the installer/service technician .
It is carried out with the key provided, which enables you to use the following menu
of led codes:
Time setting:
Night cycle programming:
Brewing temperature setting:
Heating element safety device reset:
1) Insert the key in the lock on the control panel, gently press and turn it clockwise:
the machine automatically enters a state of partial operation suitable for programming.
2) Press any of the coffee buttons marked with the “+” sign to scroll the menu to find
the required topic.
3) Press “ENTER”, which is the double short coffee button (central) marked by the symbol
on each pushbutton panel, to confirm the choice of topic and access further instructions.
To change numerical values press the “+” and “-“ keys to increase or decrease respectively.
Then save the data by pressing “ENTER”.
4) Upon completing programming or consultation of the various topics, turn the key
counter-clockwise and remove it from the lock: the machine automatically resumes
full operation.
In general, therefore, the “+” key is used to select the topics or information required
and both “+” and “-“ keys are used to change the parameters, but always with the possibility
to restore the initial situation.
Data are only saved definitively on pressing “ENTER”.
Carefully follow step by step the instructions given below, as they provide a complete guide
to programming:
1
ADJUSTMENTS C