ELEKTRA Crema Caffe, Instruction Manual

Page: 22 / 68

22
COFFEE DELIVERY STOP MANAGEMENT (S-C-B)
To activate or deactivate the option of manually stopping the dispensing of coffee selected
by automatic doses, please switch on the machine pressing the button holding at the
same time the “single long coffee“ and “manual coffee“ buttons from the group 1.
GENERAL BASIC PROGRAMMING (A-K)
It allows to Adjustment and Maintain as explained below.
It also facilitates the providing of telephonic assistance.
General basic programming is intended for barman/espresso coffee machine operator
and installation/maintenance technician .
It is run by the “ENTER” button on the front panel and it activates a menu where following
functions can be selected:
- COFFEE BREWING DOSES PROGRAMMING
- GROUP 1 DOSES COPYING ON GROUP 2 AND GROUP 3
- COFFEE DELIVERY STOP MANAGEMENT
- SEMIAUTOMATIC GROUPS CLEANING
1) Press twice in quick succession the “ENTER” button”:
the machine automatically enters a state of partial operation
suitable for programming.
2) The instructions for the using the main menu appear on the display:
after confirming by pressing “ENTER” on the control panel, press any of the coffee
buttons marked with the “+” sign to scroll the menu to reach the desired topic.
3) Press the “ENTER” button to confirm the chosen option to scroll down the
correspondent menu or to activate the desired function.
4) Upon completing programming or consultation of the various topics, to quit
the programming options scroll the menu by the “+” button until the following
signal is displayed:
TO QUIT PRESS “ENTER”, TO REPEAT PRESS “+ “.
then, press the “ENTER” button: the machine automatically resumes full operation.
In general, therefore, the “+” key is used to select the topics or information required and
both “+” and “-“ keys are used to change the parameters, but always with the possibility
to restore the initial situation.
Data are only saved definitively on pressing “ENTER”.
Carefully follow the instructions step by step as they appear on the display - they provide
a complete guide to programming.
3
4