Electrolux IC4 4819 FFS Service Manual Download

Page: 259 / 368

Service
Manual

Feeding: Motion

04102011/GB
21-2012

Description

The motion of feeding clamps comprises the following elements:

• 4 limit switch ‘FC71’, ‘FC72’, ‘FC73’ and ‘FC75’.

• 1 back-geared motor ‘M715’ to move and move back the clamps.

• 1 motor ‘M723’ to do the spacing and closing of clamps.

• 1 potentiometer ‘P1’ to adjust the engine torque for the spacing clamps.

• 1 relay ‘KA1’ to control the M723 motor.

The FC71 and FC72 limit switch are mounted on the aluminium pro

le guide of clamps. They

are accessible by removing the splash guard of the guide of clamps.

The FC73 and FC75 limit switch are mounted on main switch support in the left casing. They
are accessible by removing the left side frame.

The M715 reducer-motor is mounted on the left casing. It is accessible by removing the left side
frame.

The M725 motor is mounted on the aluminium pro

le guide of clamps. It is accessible by

removing the splash guard of the guide of clamps.

The P1 potentiometer is mounted on the control display.

The KA1 relay is mounted in the electric cabinet. It is accessible by removing the left side frame.

advance/return clamps

back-geread motor

spacing clamps

motor

Summary of Contents for IC4 4819 FFS

















































































































































































































































































































































































Search results

Summary of Contents for IC4 4819 FFS

Reviews:

Related manuals for IC4 4819 FFS

Brands by name

Popular brands

Electrolux IC4 4819 FFS, Service Manual

Search results

Summary of Contents for IC4 4819 FFS

Reviews:

Related manuals for IC4 4819 FFS

Brands by name

Popular brands