Electrolux IC4 4819 FFS, Service Manual

Page: 147 / 368

31
22
Service
Manual
ELECTROLUX ITS Screens
04102011/GB
17.2012
The different functions of the «MACHINE CONFIGURATION»:
• 4-6 length folds limit.:
Adjustment of the maximum length of linen that the machine takes into account to change
the longitudinal folding 4 folds to 6 folds.
Factory value Minimum value Maximum value Incrementing
155 150 165 5
• Anticip. specif. LF 1:
Adjustment of the fi rst advance longitudinal fold for linen which exceeds 190 cm.
Please note that the modi fi cation of this fi rst fold of the speci fi c folds table also involves
the modi fi cation of the others folds.
Factory value Minimum value Maximum value Incrementing
30 12 45 1
• Anticip. specif. LF 2&3 (>190 cm):
Adjustment of the 2
nd
and 3
rd
longitudinal folds
Factory value Minimum value Maximum value Incrementing
35 6 41 1
• 2-3 cross folds limit (180 to 190 cm):
Adjustment of the maximum length of linen that the machine takes into account before to
active the 3
rd
cross fold.
Factory value Minimum value Maximum value Incrementing
180 160 195 5
• Diamms point:
Adjustment of the residual moisture for drying. Do not change the factory value by default
if the result is satisfactory.
Factory value Minimum value Maximum value Incrementing
140 or 5 100 or 3 180 or 8 1: depending on version
• Feeder PCB activation:
Activation / Deactivation of the COM connection of FEEDER board.
Factory value Minimum value Maximum value Incrementing
1 0 1 1
• LF PCB activation:
Activation / Deactivation of the COM connection of PLIVIT board.
Factory value Minimum value Maximum value Incrementing
1 0 1 1
• Cross PCB activation:
Activation / Deactivation of the COM connection of CROSS board.
Factory value Minimum value Maximum value Incrementing
1 0 1 1