Electrolux IC4 4819 FFS, Service Manual

Page: 61 / 368

3
11
Service
Manual
Preventive maintenance
04102011/GB
39.2009
Daily (8 h)
(at the beginning of each working day)
1 Check that the emergency stop button works correctly.
2 Check that the machine stops when you press the mobile safety protector.
Weekly (40 h)
3 Clean the drive system of the smoothing strips.
4 Clean motor ventilation grills.
5 Clean the separators.
6 Clean the detection cell and its re fl ector (on models with the folding funciton only).
7 Check and clean the fl uff fi lter (on gas heating only). Clean the box of the fi lter with
suction device.
Monthly (170 h)
8 Remove dust from outside the machine.
9 Ensure that the thermostatic regulation and overheat safety shoes are always clean
and in contact with the cylinder.
10 Check the condition of the smoothing belts, and replace them if necessary.
11 Lubricate the steam heater bearings (see lubrication chart in next pages).
12 Turn the blue O ring seals of the feeding pincers through 1/8 of a turn to relieve their
bearing surface when the pincers close.
Every six months (1000 h)
13 Check for any possible oil seepage, particularly at the fi ller plug (only on Dubixium
cylinders).
14 Grease chains (see lubrication table on the next pages).
15 Clean and check cylinder support rollers (except on machine with steam heating).
16 Check operation of the handle.
17 Inspect tightness of electrical connections on the power supply terminal block and
electrical earthing connections.
18 Clean exhaust system.
19 Inspect heating elements, cables and electrical connections (on electrical heating
only).
20 Clean gas fi lter inside the gas valve (on gas heating only).
21 Check the condition of ironing bands and their staples.
22 Check the feed bands and their drive and ejection bands (on models with the folding
function only).
23 Clean inside the machine.