Electrolux EWFLW65H - 27'' Front-Load Washer, Technical & Service Manual

Page: 71 / 92

4-9
Component Teardown
Detergent Drawer Removal and Breakdown
To open, press the button on the front of the
detergent drawer. Pull drawer open, then push
down on the release tab and pull the drawer
out of the unit. (See Figure 4-23)
To breakdown the dispenser drawer:
1. Remove the drawer from the washer.
2. The detergent, liquid bleach and fabric
softener insert lifts off the drawer assembly.
When reinstalling, be sure to seat it properly.
3. To separate the drawer front, release the three
tabs and pull the drawer front away from the
body.
4. To remove the conveyer, release the conveyer
from the tabs and lift it off.
Console Panel Removal
The console panel provides a cover for the
detergent dispenser drawer and a mounting
surface for the user interface and LCD screen.
Screws secure the console panel to the unit frame.
The wire harness connects to the control assembly
at the far right hand side behind the console panel.
To remove the console panel:
1. Remove the detergent drawer and top panel.
2. Using a #2 square bit screwdriver, extract
the three screws from the detergent drawer
area (See Figure 4-24)
3. From the top front of the washer, extract the
two screws, one on each end, securing the
console to the top of the side panels.
(See Figure 4-25)
4. Pull the bottom of the console forward, while
lifting up to release the bottom tabs from the
front panel. Use care not to strain the wire
harness connections to the control assembly.
5. Rotate the console until the electrical
connection is visible. Disconnect the electrical
connection from the control assembly.
Figure 4-24.
Figure 4-25.
Screws
Screws
Release Tab
Figure 4-23.