SOI/ADL 2009-10
21/63
599 72 40-73
Behaviour:
Until the condense switch is on full position,
phase LEDs blink.
When the switch goes on void position the LEDs
are switched OFF.
Working conditions:
Door closed.
Position 10 ( Dryer with CONDUCTIMETRIC sensor )
Last alarm display and
Purpose of test:
To see the allarm and reset it
possible reset
Behaviour:
The LCD displays the alarm while the LED will
flash on the basis of alarm
Working conditions:
Turn the knob till position 10, paying
attention not to stop to position 7, otherwise
error 32 may occur
