Electrolux Professional 603877, Installation And Operating Manual, Page: 22 / 46

22
A. Program number
B. Program timer/countdown
C. Microwave phase running
D. Program STOP option ( to be carried on by pressing the
buttons “7“ or “8“ within 9 seconds).
NOTE!
If you open the lid before the end of the program,
the display shows the icon and an acoustic
signal sounds for 5 seconds. When the acoustic
signal stops, the icon remains visible, at bottom
of the display.
To remove this icon press simultaneously the
buttons “7“ and “8“ for 4 seconds. When the
password menu activates enter the required pass-
word. The icon disappears.
Yellow triangle icon
• When the display shows the yellow triangle icon switch the
appliance OFF and ON.
• If the same icon shows up again on the display press
simultaneously the buttons “1“ and “2“ for 4 seconds until an
error code appears on the display. Inform the Service about
the indicated error.
NOTE!
Pressing simultaneously the buttons “1“ and “2“
activates the alarm LOG on the display.
Alarm events are recorded with date and time.
Press the arrows buttons to scroll all the alarms.
Once selected the required event, press
button
to display more information about the occurring
problem.
Red triangle icon
• When the appliance is used for too long it may overheats. In
this case the display shows a red triangle icon;
wait for the overheated appliance to cool down.
• In some cases after cooling the display shows the text
“Restart“; switch OFF and then ON the appliance.
Stand-by
• After a certain time of inactivity (the time out is adjustable),
the appliance switches automatically in stand-by status to
save energy.
• During stand-by status, if the lid is closed the appliance
shows the QR code, which you can scan to register the
product or access the documents you need.
NOTE!
You can recall the QR code at any time by the
programs page and pressing the button 1 and 3
at the same time for 2 seconds (refer to Fig. 1
Display structure ) or by entering the setting
menu with the provided password and pressing
the icon .
• If it is necessary to put the appliance in Standby before the
time out press simultaneously the buttons “5“ and “6“.
NOTE!
It is possible that the buttons show dashes instead
of numbers, in this case press the corresponding
positions.
I.3 Basic set up settings
To access the “Basic Setting Menu“ , you must insert a
password.
1. Press simultaneously buttons “7“ and “8“ (or “–“ and “–“ ,
depending on the model) for two seconds until the pass-
word menu activates.
2. The default factory password is “1111“. Press the corre-
sponding buttons to insert the password.