Electrolux Professional 603877, Installation And Operating Manual, Page: 42 / 46

42
Anomaly Anomaly type Description Possible causes Actions
The appliance
does not switch
on. Pressing ON/OFF
button the machine
does not react. External supply energy
missing or interrupted;
Machine internal breakage. Carefully check that the
machine cable is intact and that
the plug is inserted correctly
into the power socket (the
power socket has to be
functioning).
If the problem persists call
service.
The appliance
shuts off
unexpectedly. Blocking machine While working, the
machine switches
OFF with no apparent
action from the oper-
ator side. Temporary blackout or
false contacts or uninten-
tional power interruptions.
Check the ON/OFF button is
correctly pressed or that the
cable plug is correctly inserted.
If the anomaly re-appears, call
service.
The lid doesn't
keep closed
when the
machine is in
operating mode Blocking machine The operator closes
the lid but the lid re-
opens. Dirt accumulation inter-
feres with the closure;
Lid unlocking group dis-
connected/fault. Remove the dirt from the
handle hooks and the front
teeth; try to close the lid again:
in case still not possible to
close the lid, call Service.
The lid doesn't
open and the dis-
play shows the
symbol with the
BIG YELLOW
TRIANGLE Blocking machine Refer to the anomaly:
LID_BLK
The lid does not
open completely Warning It is needed to keep
the lid manually
opened. Lid springs need adjust-
ment or mechanical
interference does not
allow the lid to open
completely. Remove dirt/debris from the lid
hinging area and tilt the lid up
and down.
Call service if the lid opening
cannot be restored.
Much force
needed to close
the lid or the lid
opens violently Warning Much force needed to
close the lid or the lid
opens violently. Lid springs pulling too
much.
1. Hang a weight of about 0,8
kg (Flex version) on the
handle of the lid to check
whether it tilts down or not:
if not, call Service (for
standard versions use 1.1
kg weight;
2. Free up space at the back
of the unit for preventing
damages on the flexible
conduit of the lid.
The lid cannot be
closed Blocking Machine It is not possible to
complete the lid
closure. Mechanical interference or
lid offset. Remove any debris from the
areas where a mechanical
interference could prevent the
lid to close. Tilt the lid up and
down and check whether the
motion is straight or not.
In case still not possible to
close the lid, call Service.
Light button does
not work or dis-
play shows even
purple colour Blocking Machine It is not possible to
operate with the but-
tons or not possible to
distinguish any
symbol on the display. Flat cable disconnection. Call Service.
Buttons do not
work Blocking Machine Pressing the button
(s) there is no conse-
quent action. Button(s) false contact or
worn contact. Try to switch the machine OFF/
ON. If the button(s) still do not
work, call Service.