Electrolux Professional 603877, Installation And Operating Manual, Page: 31 / 46

31
CAUTION
• Pay attention when the lid is opening,
do not block the lid movement.
• Cooking surfaces are strong but not
unbreakable and can be damaged by
hard or sharp objects if falling on the
top with a certain force.
• Do NOT use the appliance in the event
of breaks, flaws or cracks.
CAUTION
As in any Microwave appliance, it can
occur to have sparks inside the cooking
chamber. These sparks do not influence
the safety of the user nor the appliance
nor the quality of the sandwich. If, as a
consequence of the sparking, a dark mark
on the metal parts is visible, this can be
cleaned with a damp cloth.
IMPORTANT
Risk of overcooking. The glass and the upper
heating plate are heating also when the lid is
opened. Do not leave the sandwich on the glass
long before and long after the cooking cycle.
CAUTION
Press the control panels buttons only with
the fingers.
J REMOVABLE TEFLON PLATE (RTP)
J.1 Precautions for use
CAUTION
Carefully follow these instructions on
using the Removable Teflon Plate (RTP)
in order to ensure the proper operation
and service life of the appliance.
The Removable Teflon Plate can be used on both sides. Each
side can be used up to about 2500 cooking cycles.
• To ensure durability, clean both sides because the hidden
side also can get dirty during use.
• We suggest a consecutive use of the same side, until 2500
cycles are reached, before starting to use the other side.
The RTP is fixed to the top heating plate by means of 4 clips.
To reach these clips, the upper heating plate has to be
removed. Proceed as described here below.
WARNING
The upper heating plate and the
glass can be hot. Make sure to fix
the RTP only when the top heat-
ing plate is cold. If not, use
protective
gloves for high
temperature.
J.2 Unlock the upper plate
NOTE!
Switch off the appliance and unplug the power
cable.
1. Open the lid and put the silicon protector “ A “ on the glass
to avoid damaging it.
2. Unlock the upper heating plate by pushing the unlocking
nut backwards “ B “.
3. Help the descent of the upper heating plate by guiding the
flexible tube “ C “.
4. The upper plate must be placed exactly on top of the
silicone protector and must not be rotated during the
descent.
The RTP fixing clips are visible on the upper part of the top
heating plate.