OPERATION
VistaPro 2000 User's Manual
3-25
Wired Keypad
A wired keypad is either a "Protocol A" keypad (the original setting at
manufacture) or a "Protocol B" keypad. You can prohibit the projector from
responding to a particular protocol, or you can ensure that the projector responds
to either protocol. You can also prevent the projector from responding to the
keypad. In this menu, select one of the following protocols for the projector:
OFF
The projector will not respond to the
wired keypad.
A
The projector will respond only to a
wired keypad set to protocol A.
B
The projector will respond only to a
wired keypad set to protocol B.
A or B
The projector will respond to a wired
keypad set to either protocol A or B.
NOTE: Keypads are set at manufacture to "Protocol A". Please see 2.10,
Keypad Protocols for information about setting keypad protocols.
Baud Rate
The baud rate setting determines the speed of
communications. It is important if you are controlling the
projector with an external device such as a computer or
another projector via an RS-232 port. The VistaPro 2000 baud
rate must be set to match the baud rate of the controlling
device. If you are unsure about what baud rate to assign, refer
to the documentation for the controlling device. By default, the projector baud
rate is set to 9600.
NOTE: 1) The baud rate setting does not affect the switcher port, which remains
at 9600. 2) See 2.9, Serial Port Connections and Appendix D for more
information about cable connections between devices.
Source Selection
Choose how you want to select sources from the
key.
Choices are 1-digit entry, 2-digit entry, or a scrollable list of
sources (note that each source to be included in the list must
also be tagged in the "In Menu" checkbox in the Source Setup
menu).
Image Orientation
Choose from Front, Rear, Inverted Front, Inverted Rear
according to your installation. If the setting is incorrect,
the image will be reversed and/or upside down. See 2.6,
Operating Orientation for an illustrated explanation.
Language
Choose to display menu text in English, French, German, Italian or Spanish.
Projector Number
Enter a three-digit number (such as "000") to assign a number to the
projector currently in use. Numerical identity for projectors is