OPERATION
VistaPro 2000 User's Manual
3-14
If you define a new source setup without a signal present, the projector memory
remains uninitialized until you "Update" the setup with a signal present. See
Updating a Source Setup below.
Repeat Steps 1 and 2 for each remaining new source you wish to add. Press
or
on the keypad to accept all new sources defined.
You can edit the setup information assigned to a source. For example, you can
enter text for the source name (such as "VHS#1" or "My PC"), or you can
change the switcher number, slot number, etc. pertaining to a specific source.
From the presentation level press
to bring up the main menu. Highlight the
Source Setup icon and press
to call up the Source Setup menu.
Highlight and select the center button at the bottom of the
screen. From the pull-down list, select "Edit". This will turn this
button into an "Edit" button until you select a different option
— "Copy", "Delete", or "Update" — from the list.
NOTE: For quick access while in the first four columns of the Source Setup
window, use
for "Edit",
for "Copy", and
for "Delete".
Using the arrow keys, return to the setup window above the "Edit" button and
select the desired source. Edit as necessary to accurately reflect your source
connections:
•
Source#:
Enter any new valid source number from 1-99. If the number you
choose has already been assigned, a message box will appear upon exiting
the source setup window. Either cancel and enter a different number or
overwrite the old source.
•
Source Name: Enter a maximum of twenty characters to describe your
source (see Editing Text, above)
•
Switcher#: Enter "0" if the signal is physically connected to the projector
itself. Enter 1-9 if the signal is physically connected to a switcher.
•
Slot#: Enter 1-9 for a specific slot on a switcher or 1-4 for a connection to
the projector itself.
•
Checkboxes: Toggle any checkboxes as desired for the source.
Repeat for each source you wish to edit. Press
or
(using keypad) to
accept all editing.
Highlight and select the center button at the bottom of the screen.
From the pull-down list, select "Copy". This will turn this button
into a "Copy" button until you select a different option — "Edit",
"Delete", or "Update" — from the list.
Using the arrow keys, return to the setup window above the "Copy" button and
select a source setup you wish to copy. The new source will be defined with the
same settings from this setup and will be assigned the lowest available source
number — the original setup remains intact.
STEP 3
Editing a Source Setup
'
STEP 1
STEP 2
STEP 3
Copying a Source Setup
'