INSTALLATION & SETUP
VistaPro 2000 User's Manual
2-14
Figure 2.15. RS-232 Serial Port Connection to a Switcher
To control multiple projectors with a computer/controller, chain the projectors
together by connecting the "NETWORK OUT" connector of the first projector
(already connected to the computer/controller) to the "NETWORK IN"
connector of the next projector in the chain (Figure 2.16).
Figure 2.16. Adding Another Projector
Continue connecting projectors in this way to the last projector in the chain, so
that only the last projector has an empty "NETWORK OUT" connector. See
Figure 2.17.
Communication parameters such as baud rate must be set to match the particular
controlling device—refer to the documentation that came with the controlling
device in order to determine the proper baud rate. See 3.7, Controlling System
Parameters if you need help changing the projector baud rate from its default of 9600.
If using multiple
'
projectors
