12162021JA
www.akiascreens.com
U-00206
1
EDGE FREE
®
CLR
®
4
Ceiling Ambient Light Rejecting Fixed Frame Screen
For model: AK-NB115H-CLR4
USER’S GUIDE
M Type - Version 1
____________________________________________________________________________________________
Product Description:
The
Akia EDGE FREE CLR
®
4
Series
is a fixed frame projection screen that uses Akia’s EDGE FREE
®
technology.
The EDGE FREE
®
design resembles a flat panel TV display. The
EDGE FREE CLR
®
4
includes a micro-thin bezel
trim to further enhance the frame appearance and absorb projector overshoot.
The screen material included is our
CLR
®
4
, which is an optical lens front projection material precisely formulated
for environments with minimal control over room lighting. It was designed to filter and absorb overhead light while
directing table-top mounted ultra-short throw projection. It best for family rooms, educational facilities, conference
rooms or any applications in which incident light is a factor.
Screen maintenance
Dust, dirt and scratches on the projection screen surface will affect the quality and performance of the projection
image. Follow the instructions below to properly maintain the screen.
1) The screen surface has a horizontal linear structure.
DO NOT
wipe the screen up and down or in a circular
motion.
Wipe gently from left to right only
.
2) Clean the dust on the screen surface with a soft brush or microfiber cloth. A rough/coarse towel or cloth may
damage the screen’s surface.
3) Gently wipe the screen with a lightly moistened white lint free cloth with water or with a neutral detergent
(1mL/0.33 oz) mixed with water (1000 mL/33.8 oz).
Notes: The following precautions should always be followed to avoid damaging the material, which is
not covered under warranty.
•
Don’t touch the screen material to avoid leaving fingerprints.
•
Use gloves when handling the material.
•
Don’t scratch the material, as it will leave permanent markings on the screen’s surface.
•
Don’t point to the screen material with a fingertip or other sharp objects to prevent damage to the material.
•
Don’t use acetone, benzene, alcohol and any other organic solvents to clean the screen material. Using such
chemicals will permanently damage the screen.
