manualshive.com logo in svg

Electro Industries Nexus 1262, Installation & Operation Manual

Share
Download
Electro Industries Nexus 1262 Installation & Operation Manual Download Page 93

Electro Industries/GaugeTech  

Doc # E151701   

         

8-3

•

Performs Bidirectional Loss Compensation.

•

Requires no additional wiring; the compensation occurs internally.

•

Imposes no additional electrical burden when performing Loss Compensation.

Q

Loss Compensation is applied to 1 second per phase Watt/VAR readings and, because of that, affects

all subsequent readings based on 1 second per phase Watt/VAR readings. This method results in loss

compensation be applied to the following quantities:

•

Total Power.

•

Demands, per phase and Total (Thermal, Block (Fixed) Window, Rolling (Sliding) Window and

Predictive Window).

•

Maximum and Minimum Demands.

•

Energy Accumulations.

•

KYZ Output of Energy Accumulations.

NOTE:

Loss Compensation is disabled when the meter is placed in Test Mode.

8.2:  Nexus®  1262/1272  Meter  Transformer  Loss  Compensation  

Q

The Nexus® meter provides compensation for active and reactive power quantities by performing

the numerical calculations using factors derived by clicking the TLC Calculator button on the

Transformer Loss screen of the Device Profile or by manually figuring values in section 8.2.1,

Calculating Transformer Loss Compensation Percentages (Work Sheet). Enter the derived values in

the Device Profile screen of the Communicator EXT software (values will automatically be entered

from the TLC Calculator button). 

Q

The Communicator EXT software allows you to enable Transformer Loss Compensation for Losses

due to Copper and Iron, individually or simultaneously. Losses can either be added to or subtracted

from measured readings.

Q

Loss compensation values must be calculated based on the meter installation. As a result transformer

loss values must be normalized to the meter by converting the base voltage and current and taking

into account the number of elements used in the metering installation. For three element meters, the

installation must be normalized to the phase-to-neutral voltage and the phase current; in two element

meters the installation must be normalized to the phase-to-phase voltage and the phase current. This

process is described in the following sections.

Summary of Contents for Nexus 1262





















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands