manualshive.com logo in svg

Electro Industries Nexus 1262, Installation & Operation Manual

Share
Download
Electro Industries Nexus 1262 Installation & Operation Manual Download Page 88

Electro Industries/GaugeTech  

Doc # E151701  

6-12

Figure 6.16: Output Module Wiring Detail

Q

The Nexus® 1262/1272 meter will 

NOT

supply power for the optional external displays or the

Output modules. 

You must use an additional power supply, such as the EIG PSIO.

The wiring is

the same for all the units.  The only difference between the Output modules and the displays is that

the port is on the side of the Output module (see Figure 6.13), while the displays have the port on

the back.

See Chapter 5 for communication details.  See Figure 5.11 for wiring details.

Nexus® Output Modules Wiring Diagram

Auxiliary Power (PSIO) is

supplied through pins 4 & 5

Connection through

SHIELD, B- & A+ to 

Nexus® 1262/1272 Meter’s

Port 4 

(Detail)  Output Port

Summary of Contents for Nexus 1262





















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands