Electro Industries Nexus 1262, Installation & Operation Manual

Page: 50 / 212

e
Electro Industries/GaugeTech Doc # E151701 4-6
Q
Settings can be preset for the following sets
of values:
Primary Energy, Secondary Energy, Primary
Energy (Quadrants), Secondary Energy
(Quadrants), Internal Input Accumulators,
KYZ Output Accumulators, Q Hours, I & V
Squared T Accumulators, Cumulative Demand
(Secondary) and Uncompensated Energy.
Examples
of some of the screens are shown here.
1. Click the
Preset Boxes
for the values you want to set.
2. Click
Set
to save your entries or
Cancel
to exit the
screen without saving any changes.
4.2.4: Exiting Test Mode
Q
Exit Test Mode in one of the following three ways:
1. Pressing and holding the
Test Button
for more than 3 seconds.
2. By the
Test Mode Time-Out Timer
, if no load is present.
3. By the
Extended Test Mode Time-Out Timer
, if load is present.
These options are explained further in the following sections.
Q
Pressing the
Test Mode Button
for more than three seconds ends Test Mode and returns the meter
to Normal Mode.
Q
The
Test Mode Time-Out Timer
has two modes of operation, depending on whether the meter sees
measurable load.
If the meter does not recognize measureable load:
The meter watches for user interaction by monitoring activity on the
Test Button
and the
Reset
Button
. If neither button is pushed within the programmed Exit Delay time, the meter