Electro Industries/GaugeTech Shark 100B Installation And Operation Manual Download

Page: 107 / 216

Doc

E145701

6-11

6: Using the Shark® 100 Meter

Electro

Industries/GaugeTech

™

Powered by Innovation™

2,000/5 amps: Set the Ct-n value for 2000 and the Ct-S value for 1.

10,000/5 amps: Set the Ct-n value for 1000 and the Ct-S value for 10.

NOTES:

• The value for amps is a product of the Ct-n value and the Ct-S value.

• Ct-n and Ct-S are dictated by primary current; Ct-d is secondary current.

Press

Enter

Use buttons to set Ct-n Ct-d cannot be changed Use buttons to select

scaling

6.2.5.3: Configuring PT Setting

The PT Setting has three parts: Pt-n (numerator), Pt-d (denominator), and Pt-S (scal-
ing).

1. Press the

Enter

button when Pt is in the A window. The PT-n screen appears. You

can either:

• Change the value for the PT numerator.

• Access one of the other PT screens by pressing the

Enter

button: press

Enter

once to access the Pt-d screen, twice to access the Pt-S screen.

a. To change the value for the PT numerator or denominator:

From the Pt-n or Pt-d screen:

• Use the

Down

button to select the number value for a digit.

• Use the

Right

button to move to the next digit.

MENU

ENTER

MENU

ENTER

MENU

ENTER

MENU

ENTER

Summary of Contents for Shark 100B

























































































































































































































Search results

Summary of Contents for Shark 100B

Reviews:

Related manuals for Shark 100B

Brands by name

Popular brands

Electro Industries/GaugeTech Shark 100B, Installation And Operation Manual

Search results

Summary of Contents for Shark 100B

Reviews:

Related manuals for Shark 100B

Brands by name

Popular brands