manualshive.com logo in svg

Electro Industries/GaugeTech Nexus 1250, Installation & Operation Manual

Share
Download
Electro Industries/GaugeTech Nexus 1250 Installation & Operation Manual Download Page 69

Chapter 6

Chapter 6

Using the Nexus External Displays

Using the Nexus External Displays

6.1: Overview

6.1: Overview

n

Electro Industries offers two external displays for use with the Nexus.  The P40N is our LED
display, which provides easy-to-use access to the information stored in the Nexus.  The P60N is our
Touch Screen Display, which provides easy access to Nexus readings and information combined with
a graphical touch screen presentation.

n

Plug one of the Nexus External Displays into port 3 on the Nexus Monitor, using the RS-485 cable
supplied. The Displays operate at 9600 baud; port 3 is factory-set to 9600 baud (see Chapter 5 for
communication details). To use the Displays on another port, configure that port to operate at 9600
baud, using the Nexus Communicator Software; see the 

Nexus Communicator User Manual

.

6.2: Nexus P40N LED External Display

6.2: Nexus P40N LED External Display

n

The Nexus P40N LED External Display has three modes:

•

Dynamic Readings Mode 

(section 6.3 and 6.4)

•

Nexus Information Mode 

(section 6.5 and 6.6)

•

Display Features Mode 

(section 6.7 and 6.8)

n

Each Mode is divided into Groups. Most Groups are further broken down into Readings.

•

Use the 

MODE

button to scroll between Modes.

•

Use the 

UP/DOWN

arrows to scroll from Group to Group within each Mode.

•

Use the 

LEFT/RIGHT

arrows to scroll from Reading to Reading within each Group. 

n

Use the Nexus Communicator software to Flash Update the P40N External Display.

e

Electro Industries/GaugeTech  

Doc #: E107-7-06-121

6-1

LED Display

Up/Down Arrows

Mode Button

Left/Right Arrows

Figure 6.1: Nexus P40N LED External Display

Courtesy of NationalSwitchgear.com

Summary of Contents for Nexus 1250




















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands