manualshive.com logo in svg

Electro Industries/GaugeTech Nexus 1250, Installation & Operation Manual

Share
Download
Electro Industries/GaugeTech Nexus 1250 Installation & Operation Manual Download Page 108

e

Electro Industries/GaugeTech  

Doc #: E107-7-06-121

10-2

10.2: Hardware Connection

10.2: Hardware Connection

n

Use RJ-11 Standard Telephone Line to connect with the Nexus.  The RJ-11 line is inserted into the

RJ-11 Port on the face of the Nexus with Internal Modem Option.

n

The connection using RJ-11 into the Nexus is virtually unlimited, since it utilizes a PSTN (Public
Switched Telephone Network).

n

To connect with other Nexus Monitors in either local or remote locations, you MUST use 

Port 2

as

a Master and an RS-485 connection to 

any port

on the remote Nexus.  

n

The Address of the remote Nexus 

MUST

be something other than “1”.

n

The link using RS-485 is capable for up to 4000 feet (1219 meters).

Courtesy of NationalSwitchgear.com

Summary of Contents for Nexus 1250




















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands