Elcon Models - © 2010
42
Turn in the M6 set screw and now simply turn it onto the
crankshaft of the engine.
Madeschraube M6 eindrehen und Kuplung auf die Welle
der Motor drehen.
Stelbout M6 in de koppeling draaien. Koppeling op
krukas van de motor vastdraaien.
6
Body / Karosse / Kap
•
The body supplied is pre-cutted and drilled. Before cutting or drilling any extra holes or
sections, first try the unpainted body onto the chassis to determine the exact desired place.
•
When you cut the body use the appropriate scissors or cutting tool.
•
Before painting wash the inside of the body with a mild detergent, rinse and dry thoroughly.
•
Apply decals and mask windows per your personal design.
•
Paint the body using paints formulated for polycarbonate bodies.
•
Start with the darkest colour. Each new applied colour should be lighter, finish with white for
best result and contrasting colours.
•
Its better to apply more thin layers than 1 thick layer.
•
Remove masks when paint is dry.
•
Peel off the external film when you have finished painting.