manualshive.com logo in svg

ELCOM Euro-2000M Alpha, User Manual

Share
Download
ELCOM Euro-2000M Alpha User Manual Download Page 99

© Elcom s.r.o.

Euro-2000M Alpha

        Error messages and self tests

99

LowBat

Display:

8.2.   What to do in case of power failure.

8.2.1.  Power failure

This part is important only for registers that operate without the built-in accumulator.

If you have used the register and if the power failure occurs it is necessary:

•

 to switch the register off

•

 after electric power recovery  switch on the register

•

 if the register displays the text „The purchase not finished“  it is necessary to complete the

purchase and compare the resulting sum with the total of registered items within the pur-

chase; if one of the items has not been added to the total sum of the purchase but it was

sold to the customer it is necessary to register it additionally

•

 if power failure is encountered during printing  and the report  has not been printed, switch

the register on and repeat the report again.

8.2.2.   Failures of register as a result of interference in the power network.

Accidental failures of electronic equipment being frequently caused by the power network or by electromag-

netic interference. In a case of very intensive interference in your working area, or in the case of over or under

voltage, installation of protective devices can help significantly. Ask your authorized dealer or service techni-

cian for help.

8.3.   What to do in case of “LowBat“ signaling

Displaying of  „LowBat“ warns the operator about discharging the built-in accumulator.
If the discharging is low, the „LowBat“ is being displayed only when the receipt is printed. „LowBat“ is momen-

tarily displayed and the operator is warned by a warning beep tone. If discharging is intensive ”LowBat“ is

displayed permanently and an interrupted warning tone is sounded.

It is necessary :

•

 to register the purchase

•

 additionally to connect the register

   to the external adapter

•

 if it is not possible to connect the register to the adapter you should turn it off and start to use

it only after connecting the adapter or battery box

Warning:

Long-term usage of the register when „LowBat“ is signaled can result in decreasing the accu-

mulator life-time or in damaging the register. If the internal accumulator is very discharged and

you want like to charge it by external adaptor, first of all be sure turn off the ECR. After that,

connect the external adaptor for at least 15 minutes (ECR is off). The internal accumulator is

chargeing even the ECR is turned off.

Summary of Contents for Euro-2000M Alpha





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands