manualshive.com logo in svg

ELCOM Euro-2000M Alpha, User Manual

Share
Download
ELCOM Euro-2000M Alpha User Manual Download Page 19

19

© Elcom s.r.o.

           Euro-2000M Alpha

     Introduction, basic characteristics

T

The training mode is used when the operator or the manager practices register operations. The

training mode provides all functions of the R mode. In this mode transactions are not included

in the daily or periodical reports. The receipts printed in this mode are marked by the text „Invalid

document„. When switching the register into this mode, the topical time in the first line and

“

TRAINING MODE T

” in the second line appears on the display.

L

The cash register is locked. By switching the register to this mode, the current time in the first

line and “

LOCK MODE

” in the second line appears on the display. The keyboard functions are

inactive. If the register is connected to the main source of electricity, circuits containing the data

concerning the sale, time and date are supplied. This mode is designed for charging the internal

accumulator, which backs up the data.

R

Position  - registrations. This position is used for all registrations and transactions. By switching

into this mode, the topical time in the first line and topical date and day in the second line appears

on the display until you begin the registration.

12>00>00

L  MODE

12>00>00

TRAINING MODE T

12>00>00

FRIDAY   01/01/1999

X

The X mode is used to print the sale reports. Printing of the reports does not reset the data about

the cash register sales.  This mode with the current time in the first line and ”

X MODE

“ in the

second line appears on the display.

Z

The Z mode is used to print all types of reports that reset cash register memory data registers.

When this mode is selected, the current time appears in the first line and ”

Z MODE

“ in the

second line on the display.

P

The P program mode is used to program all the values and functions of the cash register. When

this mode is selected, the current time appears in the first line and ”

PROGRAMMING

MODE

“ in the second line on the display.

12>00>00

PROGRAMMING MODE  P

12>00>00

Z  MODE

12>00>00

X  MODE

Summary of Contents for Euro-2000M Alpha





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands