manualshive.com logo in svg

ELCOM Euro-2000M Alpha, User Manual

Share
Download
ELCOM Euro-2000M Alpha User Manual Download Page 15

15

© Elcom s.r.o.

           Euro-2000M Alpha

     Introduction, basic characteristics

Numerical keys are used for numerical values entry.

Department keys (used during recording of department sales). They are used for

report of department sales in X mode and for department programming in P mode.

The „PAPER FEED“ key shifts the receipt ribbon without printing. The receipt ribbon

is fed in 1,5 cm by pressing this key.

Pressing this key allows you to enter bar code through the keyboard in R and T mode.
Pressing this key immediately after pressing the key 

I

  (REFUND) in T mode

allows you to switch the receipt printing on and off. The printinting switched off is

signaled by character “

T

”.

This key is used to register the weight of goods from the electronic scales.

After finishing a transaction it is possible to print out the same receipt again by
pressing this key immediately after pressing the key 

I

 (REFUND). The receipt is

denoted „

DUPLICATE

“. It is also used for PLU stock programming in P mode.

The button CLEAR is used to clear an amount that has been entered incorrectly from

the numeric keyboard. This button also cancels an incorrectly entered function and

the sound signaling ERROR/ALARM.

The VOID button is used to correct the item that has already been registered. If the

transaction is finished in R or T mode, the key is used for switching the cash register

between standard transactions and the PC ON-LINE mode. It is also used for

function texts programming in P mode.

The REFUND button enables you to pay back money, e.g. for damaged goods,

during the sale or as an independent transaction. After finishing a transaction it is
possible to print out the same receipt again by pressing the key 

F

 immediately after

pressing the key 

I

 (REFUND). The receipt is denoted „

DUPLICATE

“.

Pressing the key 

G

 

immediately after pressing the key 

I

  (REFUND) in T mode

allows you to switch the receipt printing on and off.

It is used for VAT levels programming in P mode.

The TIME/X button is utilized for multiplication, if two or more pieces of the same item

are being sold. It is also used for displaying the time in the registration mode. It is also

used for backlight activation in X mode.

/

..

9

;

..

B

E

H

F

G

I

J

K

2.4.   Button  names and their functions.

Summary of Contents for Euro-2000M Alpha





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands