background image

66

Registration mode

 Euro-2000M Alpha

               © Elcom s.r.o.

DPT 2          

I

1

*

31.20               =31.20

ADD-ON%+  5.00%
                                1.60

DPT 2            

I

1

*

31.20                 =31.20

ADD-ON%+ 10.00%
                                  3.10

                                1.60

ADD ON _!

Display:

            Add on operation display.

Note 1:

The entering of the add on value from the keyboard is possible if the value is lower than the

preprogrammed limit (system flag No. 7).

Note 2:

In case of linked PLU, the add on is applied to the first item only.

4.8.   Percent add-on and percent discount

The system permits programming of the value of the percentage rate that is usually used for add-on 

S

and for the discount rate 

T

. If you need to register a different rate than the one preprogrammed, enter the

numeric value of the add-on or of the discount before pressing the percent button. The value of a new rate

will be effective only for one registration.

4.8.1.   Percent add-on

Example 1: A five percent add-on for special services is added.  In the following example the 

S

 button was

preprogrammed for five percent.

Note:

If all items within a  transaction  have the same handling charge, the charge may be added at one

time for the whole transaction.  When all items have been registered on which the add-on is
applied, press the 

V

 and 

S

 button.

Step No.     Key operation

   

1.

3120

 

<

   

2.

S

Print:

Example 2:  Other than preprogrammed rate (10%) entry.

Step No.     Key operation

   

1.

3120

 

<

   

2.

10

 

S

Print:

Summary of Contents for Euro-2000M Alpha





































































































Reviews: