24
A
U
T
O
A
U
T
O
AUTOMATIC OVEN COOKING
To cook food automatically in the oven,
it is necessary to:
1. Set the length of the cooking time
2. Set the end of the cooking time
3. Set the temperature and the oven
cooking program.
These operations are done in the fol-
lowing way:
1. Set the length of the cooking time by
pushing the
button and the
button to advance, or
to go back
if you have passed the
desired time (fig. 6.5). The AUTO and
the
symbol will be on.
2. Set the end of the cooking time by
pressing the
button (the cooking
time already added to the clock time
will appear), and the
button (fig.
10.6); if you pass the desired time
you may get back by pushing the
button.
After this setting, the
symbol will
go off. If after this set-
ting, the AUTO flash on the panel and
a buzzer gives off, it means there was
an error in the programming, that is
that the cooking cycle has been supe-
rimposed on the clock. In this case,
modify the end of cooking time or the
cooking time itself by following again
the above mentioned instructions.
3. Set the temperature and the cooking
program by using the switch and ther-
mostat knobs of the oven (see specific
chapters).
Now the oven is programmed and every-
thing will work automatically, that is the
oven will turn on at the right moment to
end the cooking at the established hour.
During cooking, the
symbol remains
on.
By pushing the
button you can see
the time that remains until the end of
cooking.
The cooking program may be cancel-
led in any moment by pushing
.
At the end of the cooking time the oven
will turn off automatically, the
symbol
will turn off, AUTO will flash and a buz-
zer will be released, which can be tur-
ned off by pushing any of the bottons.
Turn the switch and thermostat knobs to
zero and put the programmer onto
“manual” by pressing the
button.
Attention: An energy blackout makes
the clock go to zero and cancels the set
programs.
After a blackout, three zeros will flash
on the panel.
Fig. 6.6
Fig. 6.5
Electronic programmer
