18
2004 software Manual
4.2.2
Using ou first page
Once created the page appears as follows. All the pre-programmed scenes and switches have been
created and our fixtures are now ready to be used.
It is now important to give a short description of the page. The page is an independent window that
can be moved, resized and/or attached to the software window. Using our fixtures is very easy with
all these buttons. All the functions of our fixtures are available and easy to find on the page. In our
example, we can find all the colours of the colour wheel (one colour = one button), all
gobos...prisms, dimmer...
Let us start playing with our
SPOT 575
, first of all we can select a scene (yellow). This would open
the shutter-beams and select the colour white. To select a scene we must click on the small arrow
located on the upper-right corner of the scene button (see below).
All the pre-programmed scenes are now listed and we just have to select one of them. We decide to
select the "@Tilt Move 1" scene...and here it goes. Our fixtures are now making a tilt movement. We
can also select the "Green204" colour, then a gobo like "Abstract4" and finally a "3Facet" prism and
our first effect has been created.
