15
2004 software Manual
We decide not to change the
highest X&Y amplitude for
our first page. This means
we will use the maximum
amplitudes of our
SPOT 575
.
Then, click on "Next" to go to
the next step.
Here is one the most
important step.
2004 Software
will create pre-programmed
buttons (scenes, switches)
which will allow us to control
our moving heads before
programming. So, select
"Yes" to be able to use those
buttons. Then, click on
"Next" to carry on.
Here we can test each pre-
programmed scene with our
fixtures and then decide to
include it or not in our new
page. By default, all the pre-
programmed scenes use the
same area (80% of their
maximum amplitude).
However, it might be very
important to modify this
setting to make our 6
SPOT
575
always move in the
wished area (e.g dance-
floor...). So, select
"Customize area" and click
on the associated button to
open the following window.