EL.MO. Spa PREGIO Series, User Manual, Page: 9 / 24

9
Arming/disarming signalled from siren
Arming and disarming can be signalled by the sirens con-
nected to the control unit. In detail:
• arming : single blink, acoustic signal
• disarming : double blink, acoustic signal
Arming from external control device
Control units can recognise arm/disarm commands sent by
control devices different from the compatible ones (exam-
ple: receivers already existing in the system.)
Such control devices has to be wired to control units zones
conveniently and set for such purpose.
They shall feature the same performance level as the con-
trol unit.
2.5 Enter UsER MENU on keypad
PREGIO units provide a user menu that can be accessed at
keypad.
User menu items allow users to manage basic maintenance.
The user can access the menu only if authorised by the
installer (with Basic maintenance option).
To enter user menu:
Fri01/09/17 9:00
Welcome
Maintenance
BYPASS ZONES
*
U U U
U U U
(default: 111111)
– Key in user code (default: 111111).
It is strongly recommended to change the code to
strengthen system security level. The installer cannot
see it since it is represented by asterisks.
– Press * key.
– Use arrow keys ↑ or ↓ to browse among options.
– Press OK to enter a menu item, STOP to exit setup.
– If you press STOP repeatedly after an operation, you may
be asked to save changes.
SAVE CHANGES?
(Ok=Yes #=No)
While in user menu, the 4 LED indicators will blink
simultaneously.
The user menu lists the following items (on the right, the
number of the paragraph with details on the items):
▼ MAINTENANCE
→ BYPASS ZONES - § 2.5.1
p. 9
→ INSTALLER AUTH. - § 2.5.2 p. 9
→ OUTPUT CONTROL - § 2.5.3
p. 10
→ MANAGE SIM BAL. - § 2.5.4 p. 10
→ CLOCK SETUP - § 2.5.5 p. 10
→ CLOCK CALIBR. - § 2.5.6
p. 10
→ WEEKLY PROGRAMMER - § 2.5.7 p. 10
→ MANAGE USERS - § 2.5.8
p. 10
→ PHONE NUMBERS - § 2.5.9 p. 10
→ CHANGE CODE - § 2.5.10 p. 11
→ SYSTEM TEST - § 2.5.11
p. 11
→ MANAGE CHIME - § 2.5.12 p. 11
→ EVENTS LOG - § 2.5.13
p. 11
2.5.1 Zones bypass
Users can bypass zones with anomaly (example: for mainte-
nance operations).
– Use arrow keys ↑ or ↓ to go to BYPASS ZONES option.
– Press OK to enter the menu.
– Use arrow keys ↑ or ↓ to browse among zones or enter
the zone number directly (example, key in 003 for zone
3) .
– Press OK to bypass the zone and exit the menu, or press
STOP to exit the menu without saving.
Zone 001 BYPASS
Zone 001
To include the zone again, repeat the steps.
Zone 001 ENABLED
Zone 001
If the installer has enabled Zone exclusion only from in-
staller option via BrowserOne, the menu will not be avail-
able for users and zones can be bypassed by the installer
only.
2.5.2 Limits to installer access
Installers access to configuration is subject to users’
authorisation.
The authorisation is valid for all access modes: from keypad,