EL.MO. Spa PREGIO Series, User Manual, Page: 7 / 24

7
Area 1
Arm: 123--678
If you press key 8 again, sector 8 will be excluded from sec-
tors proposed.
Per sectors group:
Press a number key to change sectors proposed for arming
for that specific key according to the following table:
Status BEFORE pressing a
sector key
Status AFTER having pressed
a sector key
At least one sector (but not
all) among those associated
to that key is proposed for
arming
→ All sectors associated to that
key are proposed for arming
(as long as they are authorised
for that user)
All sectors associated to that
key are proposed for arming
→ No sectors associated to that
key are proposed for arming
(as long as they are authorised
for that user)
If sectors proposed for arming are
Area 1
Arm: 123--67-
and sector key S2 has sectors 3, 4, and 5 associated (all
authorised for the user too), when you press sector key S2
items proposed for arming will change:
Area 1
Arm: 1234567-
– When finished, press OK to start arming, STOP to cancel
it.
– If exit time has been set, it will be marked by beep sounds:
leave the protected areas within the set time walking
through the path set.
At the end of exit time, sectors proposed will be armed (sec-
tor keys remains lighted unless the option Hide Arming Sta-
tus is enabled).
2.4.5 Fast arming - 4 areas / 4 sectors mode
If two specific options are enabled, sectors can be armed
without entering the user code.
Arming with sector key + OK
The option Activate fast arming in BrowserOne has to
be activated.
– Press sector key of the sector to be armed (the sector can
be armed if it is authorised at least to one user). The key
will start blinking.
Sector S1.A1
FAST ARMING?
– Press OK to confirm (if not, the procedure will be can-
celled after 5s).
– If an exit time has been set, leave the protected areas
within the set time.
When during the procedure another sector key is pressed,
the sector to be armed will be changed.
The procedure will be cancelled if you press the key of a
sector that cannot be armed.
Arming with double pressure
The option "Fast arming/output manoeuvre" has to
enabled with the double pressure of the sector key
in BrowserOne.
– Press sector key of the sector to be armed (the sector can
be armed if it is authorised at least to one user). The key
will start blinking.
Sector S1.A1
FAST ARMING?
– Press the key again.
– If an exit time has been set, leave the protected areas
within the set time.
The procedure will be cancelled if you press the key of a
sector that cannot be armed.
2.4.6 Fast arming - 8/16 sectors per area mode
Fast arming option can be enabled under ‘8/16 sectors per
area’ mode (if checked during system configuration); to do
so, press sector key + OK, or press sector key twice (as ex-
plained in the previous paragraph 2.4.5 p. 7.
Sectors associated to that sectors key will be armed as long
as they are also authorised for the user.
2.4.7 Disarming
When system is armed: