15
The function can be activated also via remote control
command.
M.ON
(see "8. REMOTE INTERROGATION AND REMOTE CONTROL"
on page 18).
When the activation request is accepted, the unit will send
an SMS text to confirm
REMOTE LISTENING REQ.
and will call the number and immediately activate the re-
mote listening function for 2 minutes.
5.2 Receiving sMs from control units
If the unit is equipped with GSM module, during configu-
ration it is possible to activate SMS sending upon events
(alarms, arming/disarming commands, anomalies).
Users with their phone number on the list will receive a SMS
text from the unit upon occurrence of such events.
SMS texts contain information on system status.
The unit can send maximum 1000 events / day.
During installation it is possible to set "forwarding numbers
", that are number to which the unit will forward SMS texts
not identified as remote control texts (example, SMS texts
sent by phone companies, etc.)
5.3 sIM balance check
If installers activate the balance control of prepaid SIM cards
installed on to GSM module, users can suspend / activate
again the balance control:
• from keypad (
SIM BALANCE MANAGE
in user menu) de-
tails at: 2.5.4
p. 10
• via SMS (texts
C.OFF / C.ON
messages) details at:
9
p. 18
5.4 sending sMs to control units
SMS texts are used to receive information about unit status
or send commands to the unit.
For details, please see 9
p. 18.
5.5 Change number list from keypad
Users can modify the phone number list using
PHONE NUM-
BERS
in user menu.
For more information: paragraph 2.5.9
p. 10.
Such user change can be disabled during configuration.
5.6 Advanced settings
The installer can set advanced settings using BrowserOne
software.
5.6.1 Dialler block at disarming
Users can require to block phone communications (voice
and digital) caused by sectors disarming.
Dialler block function is available in
Options
menu in
BrowserOne.
If dialler block is removed, the phone dialler will activate
when the first event generated after the removal occurs.
5.6.2 Limits to dialler activations
Installers can program the control unit so that it limits the
number of events that trigger the dialler.
When the max number is reached, the voice/SMS dialler ig-
nores other calls until the next day.
This function is available in
Phone dialler
menu in
BrowserOne.
Limits refer to events, and not to calls: the amount of
calls can be higher if events cause several calls. More-
over, the limit refers only to voice dialler and not digital
dialler.
5.6.3 Disable arm/disarm commands
Installers can disable arm/disarm commands via SMS texts
or voice communications (not digital ones) for each single
user.
This function is available in
Users
menu in BrowserOne.
6
TEMPERATURE MONITORING
PREGIO series units are equipped with a temperature detec-
tor measuring the temperature inside the housing.
Temperature detected from the sensor shall be consid-
ered only as a technical indication, for example for the
installation of units inside technology closets. Do not
use it as a thermostat.
6.1 Temperature thresholds
The installer can set two thresholds, one minimum and one
maximum:
• when the temperature goes from minimum to maximum
threshold the "Maximum Temperature" event will be
generated.
• when the temperature goes from maximum to minimum
threshold the "Minimum Temperature" event will be
generated.
Such events can be used to activate the on-board relay or
an external one.
Summary of Contents for PREGIO Series
Page 22: ...22 ...