EL.MO. Spa PREGIO Series User Manual Download Page 24

Page: 24 / 24

EU DECLARATION OF CONFORMITY

The products comply with current European EMC and

LVD directives.

The full text of the EU declaration of conform-

ity is available at the following internet address:

www.elmospa.com – registration is quick and easy

GENERAL WARNINGs

This device has been designed, built and tested with the utmost care

and attention, adopting test and inspection procedures in compliance

with current legislation. Full compliance of the working specifications

is only achieved in the event the device is used solely for its intended

purpose, namely:

Multi-functional hybrid control unit for intrusion detection systems

The device is not intended for any use other than the above and hence

its correct functioning in such cases cannot be assured. Consequently,

any use of the manual in your possession for any purpose other than

those for which it was compiled - namely for the purpose of explaining

the product’s technical features and operating procedures - is strictly

prohibited.

Production processes are closely monitored in order to prevent faults

and malfunctions. However, the components adopted are subject to an

extremely modest percentage of faults, which is nonetheless the case

with any electronic or mechanical product.

Given the intended use of this item (protection of property and people),

we invite you to adapt the level of protection offered by the system to

suit the actual situation of risk (allowing for the possibility of impaired

system operation due to faults or other problems), while reminding you

that there are specific standards for the design and production of sys-

tems intended for this kind of application.

We hereby advise you (the system’s operator) to see that the system

receives regular routine maintenance, at least in accordance with

the provisions of current legislation, and also check on as regular

a basis as the risk involved requires that the system in question is

operating properly, with particular reference to the control unit, sen-

sors, sounders, dialler(s) and any other device connected. You must

let the installer know how well the system seems to be operating,

based on the results of periodic checks, without delay..

Work involved in the design, installation and maintenance of systems

incorporating this product should be performed only by personnel with

suitable skills and knowledge required to work safely so as to prevent

any accidents. It is vital that systems be installed in accordance with cur-

rent legislation. The internal parts of certain equipment are connected

to the mains and therefore there is a risk of electrocution when mainte-

nance work is performed inside without first disconnecting the primary

and emergency power supplies. Certain products include batteries, re-

chargeable or otherwise, as an emergency backup power supply.

If connected incorrectly, they may cause damage to the product or prop-

erty, and may endanger the operator (explosion and fire).

INsTALLER WARNINGs

Comply strictly with current standards governing the installation of elec-

trical systems and security systems, and with the manufacturer’s direc-

tions given in the manuals supplied with the products.

Provide the user with full information on using the system installed and

on its limitations, pointing out that there are different levels of security

performance that will need to suit the user’s requirements within the

constraints of the specific applicable standards. See that the user looks

through the warnings given herein.