EL.MO. Spa PREGIO Series User Manual Download Page 1

111

User manUal

U

LTRA

B

US

advanced serial bus

®

PREGIO sERIEs

Multi-functional hybrid control units 

for intrusion detection systems

1  

 GENERALs

PREGIO500, PREGIO1000, PREGIO1000BM, PREGIO2000 

are multi-functional hybrid control units supporting both 

wired and wireless devices.

Control units are compatible with

•   all EL.MO. series devices (keypads, readers, power 

groups, security fog systems, concentrators and single 

detectors) thanks to ULTRABUS interface;

•   NG-TRX wireless technology with connection of GATE-

WAY2K over serial line.

Optional modules can be installed to improve unit operating 

mode.

It is also possible the connection to e-Connect with the in-

stallation of suitable modules.

PREGIO1000, PREGIO1000BM, PREGIO2000 are supplied in 

a metal housing, PREGIO500 in a plastic housing.

All control units are protected against the cover opening 

and removal from wall.

Icons used in this manual

 

▼ Example of messages on keypad display

Fri01/09/17 9:00

Area 1

 

▼ Keys typing

 

▼ Usage example

Manual contents

 

▼ Keypads usage 

operating mode from keypad → cap. 2 

p. 1

 

▼ Proximity keys usage

operating mode from keypad → cap. 3 

p. 11

 

▼ Remote controls usage

operating mode with remote control → cap. 4 

p. 13

 

▼ GsM and phone communications

phone calls reception, SMS texts sending and recep-

tion → cap. 5 

p. 14

 

▼ Temperature monitoring

use of built-in temperature detector → cap. 6 

p. 15

 

▼ e-Connect usage

Information on e-Connect service → cap. 7 

p. 16

 

▼ Maximum security

maximum security property, arming with maximum 

security → cap. 8 

p. 16

 

▼ Remote interrogation and remote control

SMS sent to the unit for status or command request → 

cap. 9 

p. 18

 

▼ system test

system test to check system working → cap. 10 

p. 21

 

▼ Anomalies diagnostics

anomalies check → cap. 11 

p. 21

2  

 KEYPADs  UsAGE

PREGIO control units are multi-area devices capable of 

Summary of Contents for PREGIO Series

























Reviews: