Pellet burner GP xx sc 9
4. CONSTRUCTION DESCRIPTION OF THE PELLET BURNER “GP XX SC”.
4.1.
GENERAL CONDITIONS.
The main part from the construction of a pellet burner from series „GP xx sc” is the main
module, which consists of:
Combustion chamber, which forms conditions for optimal burning process and is
made of high quality stainless steel;
Combustion chamber’s fire-grate;
System for automatic cleaning of the combustion chamber;
Air distribution tract, which provides equal firing air feeding and also cooling of the
burner’s components;
Heating element, which ignites the fuel, positioned under the tilted part of the
combustion chamber’s fire-grate;
Firing air feeding fan, equipped with sensor for controlling of the rotation frequency
and also for adjustments;
Photic sensor, which monitors the burning process, mounted on the burner’s side and
with availability for easy cleaning;
Emergency temperature sensor for protection from the so called “back fire” in the
main module’s pellets feeding pipe;
Control module, which monitors and manages the burner’s operation;
Display panel with keyboard, which visualizes the burner’s operation mode and is
used to perform the necessary adjustments;
Connector for the fuel transport auger, used to supply the auger with electrical power;
Flexible pipe, made of special transparent high temperature resistant material (in
case of fire it does not separate toxic substances), used to connect the auger and the
main module of the burner.
Figure 4.1 presents a view of the main modules of a pellet burner from series „GP xx sc”.
