Pellet burner GP xx sc 16
6.2.1. INTERFACE PANEL OF AN AUTOMATED PELLET BURNER “GP XX SC”.
Figure 6.1 presents a view of an interface control panel equipped with display and keyboard,
used to manage the automated pellet burner from series „GP xx sc”.
Figure 6.1. Interface panel of a pellet burner from series „GP xx sc”.
Components of the interface control panel and their functions:
Button “
S
” – is used to choose a submenu and to confirm the performed
adjustments;
Button “ - ” – is used to decrease a currently changing parameter value from the
controller’s menu;
Button “
+
” - is used to increase a currently changing parameter value from the
controller’s menu;
Button “
ESC
” – is used to cancel a change of chosen parameter from the controller’s
menu and to exit a chosen operational menu.
The above presented buttons of the burner’s interface control panel might have
another function, which will be described on the display panel.
.
6.2.2. CONNECTING AND POWER SUPPLYING OF THE BURNER.
All activities over the burner’s electrical installation, adjustments requiring
dismounting of cover panels or other components, which protect from direct
contact with electrical parts, must be performed only by qualified staff.
The burner must be connected to the electrical installation of the appliance to which it is
mounted, by observing all technical safety rules. Use the power supply cable and the
attached wiring diagram for connecting to power supply voltage and to the burner’s operation
control module.
The fuel feeding auger is mounted to the hopper and is positioned in a way providing the
required fuel feed rate, as it is also filled with fuel.
Button “-” (its function
depends on the chosen
menu)
Button “+” (its function
depends on the chosen
menu)
Button “Escape”
Button “Enter”
