Pellet burner GP xx sc 44
WARRANTY CONDITIONS
The manufacture company guarantees correct and failsafe operation of a pellet burner from
series „GP xx sc”, only when the requirements for installation and operation are observed
during initialization to operation and maintenance.
The warranty start date of the automated pellet burner from series „GP xx sc” is considered
from the date of completion and stamping of its warranty card.
The pellet burner’s warranty start date is considered from the date of its initiation to
operation, but no later than 6 months from the date of purchase.
The warranty period validity of the pellet burner is 24 (twenty four) months.
The warranty is valid only if an invoice and original warranty card have been presented.
THE WARRANTY OF THE PRODUCT IS INVALID in the following cases:
Damages of the pellet burner caused by improper storage, transport and/or
unloading, not performed by the manufacturing company;
Emergencies caused by natural disasters (earthquakes, fire, floods and etc.);
The requirements for installation, operation and periodical maintenance,
presented in the present manual book, are not observed;
Attempts to recover defects, performed by the buyer or by other unauthorized
persons;
Changes in the pellet burner’s modules construction;
Incorrect technical project for installation and operation of the burner;
Damages or failures caused by reasons for which the manufacture company is
not responsible or can’t perform control;
Interferences and failures not caused by the pellet burner from series „GP xx sc”,
but have led to failures/damages in its construction;
If the irreversible temperature sticker has been colored (activated) or in case it
has been removed, torn, detached or destroyed.
Every warranty repair must be registered in the product’s warranty card.
The warranty period is stopped for a term considered from the date of a registered warranty
claim until the date of removing the failure.
