Pellet burner GP xx sc 21
Figure 6.4. The display shows information about the operation mode of the burner’s
controller – in this case it checks the operation of the firing air feeding fan.
TEST – BLOWING: –
shows the operation mode – a starting blowing of the
burner’s fire-grate through the fan is processed (shows the current phase from
the burner’s ignition).
”32
о
”
–
shows (at the lower left corner of the display panel, over the button “S”)
the water temperature in the hot water boiler (degrees Celsius). The temperature
value is displayed if a water temperature sensor is installed and the option is
activated from the controller menu.
”FC: 0% ” –
shows the light intensity of the photоsensor, in percent – it is shown
at the lower right corner of the display panel, over the button “ESC”.
Figure 6.5. The display panel shows information about the burner’s operation mode – in this
case ignition of the primary fuel doze.
S
_
+
ESC
TEST - BLOWING
32
o
FC: 0%
S
_
+
ESC
IGNITION 1 150
32
o
FC: 0%
