Pellet burner GP xx sc 24
Figure 6.6. The display panel shows information about the burner’s operation mode –
transition mode – transition from ignition to stabilization of the burning process in minimum
heating output mode.
”TRANS.:10kW
” – indicates that the burner is in transitional phase for
stabilization of the burning process, with heating output of 10kW.
After completing the transition mode the burner transits directly to normal operation mode, as
presented on Figure 6.7.
Figure 6.7. The display shows information about the burner’s heating output level, as in this
case it is the maximum heating output mode.
“COMBUST 5 – 35kW” –
indicates the burner’s heating output level (in this
case 5
th
level providing heating output of 35 kW);
“72
о
”
- indicates the current water temperature,
o
C;
“FC: 98%” –
indicates the light intensity by the photic - sensor, %.
S
_
+
ESC
COMBUST 5 35kW
72
o
FC: 98%
S
_
+
ESC
TRANS. : 10kW
32
o
FC: 65%
