Findclouds Manual 23
these basic values will shift position of horizon to a wrong place.
The points of horizon line can be entered and edited by use of mouse and to be more exactly it is possible
to zoom the window.
''Point Mode''
There are three operation modes, which can be switched circular by right mouse key:
"set point" sets a point on left mouse click.
"select" selects the point closest to left mouse click and allows to drag it by holding the left mouse button.
"delete" deletes the point closest to left mouse click.
''Direction''
The "Direction" clockwise/counter (-clockwise) sets direction of "down the list". When there is "clockwise"
activated, it is necessary to set consecutive horizon points in clockwise direction. Going into the wrong
direction would switch inside and outside of the mask and would mask the inside of the horizon area and
not the outside. It is possible to insert points by choosing a position inside of the list and go on with "set
point".
[Load]:
Loads a horizont file from inside the current Cloudcams configuration directory.
[Save as]:
The horizon points are stored as "horizon_*.txt" inside of the current Cloudcams configuration
directory, or the current chosen custom directory
[Clear]
removes all points. This might be helpful, when centring of camera was changed and the horizon
line doesn't fit any more.
