Eizo ColorEdge CG275W, User Manual

Page: 31 / 64

31
Chapter4SelfCalibration
●
Setting the mode to execute SelfCalibration “Mode Selection”
Set the mode to execute SelfCalibration (CAL1/CAL2/CAL3).
Signal input is specified for each set mode.
Mode Signal inputs
CAL1 DVI
CAL2 DisplayPort-1
CAL3 DisplayPort-2(MiniDisplayPort)
Procedure
1. Choose “SelfCalibration” from the Adjustment menu, and press .
2. Choose “Settings” from “SelfCalibration”, and press .
3. Choose “Mode Selection” from “Settings”, and press .
4. Use or to select the mode to change, and press .
5. Select “On” or “Off” with or .
6. Press
to exit.
Note
• allows you to check the mode currently available (CAL1/CAL2/CAL3).
• When “Other Modes” is set to “On”, the monitor color reproduction area is updated and the display in each color
mode will be adjusted as follows:
- In any mode other than CAL mode, the temperature is adjusted so that it is as close as possible to the specified
value.
- In Adobe RGB/sRGB/EBU/REC709/SMPTE-C/DCI modes, the gamut values are adjusted so that they are close to
each specified value.