Eizo ColorEdge CG275W, User Manual

Page: 29 / 64

29
Chapter4SelfCalibration
Chapter 4 SelfCalibration
This product is equipped with an built-in calibration sensor. As the calibration targets or schedule for
SelfCalibration are set in advance using ColorNavigator, the calibration sensor automatically executes
regular calibration. Monitor setting is not necessary for using ColorNavigator.
If ColorNavigator cannot be run due to the usage environment, SelfCalibration can be executed for an
independent monitor (see
“4-1. Setting Calibration Details “Settings”” (page 29) to “4-3. Setting Calibration
Results “Result”” (page 33) ).
Note
• When matching the measurement results of the calibration sensor with those of your measurement device, use the
Correlation Utility included with ColorNavigator. Refer to the ColorNavigator User’s Manual on the CD-ROM.
• SelfCalibration can also be executed when there are no computer signals being input.
4-1. Setting Calibration Details “Settings”
●
Setting the monitor date and time “Clock Adjustment”
Set the monitor date and time.
Note
• When ColorNavigator is started, the date and time are automatically set. Refer to the ColorNavigator User’s Manual
on the CD-ROM.
Procedure
1. Choose “SelfCalibration” from the Adjustment menu, and press .
2. Choose “Settings” from “SelfCalibration”, and press .
3. Choose “Clock Adjustment” from “Settings”, and press .
The Clock Adjustment menu appears.
4. Select date with or , and press .
5. Select time with or , and press .
Attention
• If the main power supply is disconnected for an extended period of time, the clock may need resetting.