Eitan Q Core Sapphire, User Manual

Page: 51 / 294

Components, Accessories, and Administration Sets 50
•
Output voltage: 10 VDC
> To c o n n e c t t h e A C P o w e r C o rd t o t h e I P S :
1.
Connect the Q Core AC Power Cord to the IPS.
2.
Connect the Cord Retainer to the IPS, using a Philips head screwdriver.
> To c h a rg e t h e b a t t e r y :
1.
Plug the Q Core AC Power Cord into the main power supply source.
2.
On the back of the IPS, verify that the Power LED status indicator is On (blue light).
3.
Mount the pump into the mini cradle.
4.
On the front of the pump, verify that the Charge LED status indicator is On
(blinking yellow light).
> To d i s c o n n e c t t h e A C P o w e r C o rd f ro m t h e I P S :
1.
Unplug the Q Core AC Power Cord from the main power supply source.
2.
Disconnect the Cord Retainer from the IPS, using a Philips head screwdriver.
3.
Remove the Q Core AC Power Cord from the IPS.
The cord retainer is an integral part of the IPS, and must be
connected prior to initial use.