Eitan Q Core Sapphire, User Manual

Page: 234 / 294

Sapphire Infusion Pump User Manual 233
3.
From the toolbar of the View system screen, press
Next
until the Accumulated VI
parameter is displayed.
Clearing Accumulated VI
The Accumulated VI value is cleared in the following cases:
•
The pump clears the Accumulated VI automatically
•
If the New Patient feature is disabled – Each time a New Infusion or a PreSet
Programs is confirmed (
Note:
Repeating the last infusion won't clear the
Accumulated VI).
•
If the New Patient feature is enabled – Each time a new patient is identified
(
Note:
Repeat Last Infusion is intended for the same patient; this means that a
new patient can't be identified when using the Repeat Last Infusion shortcut).
•
The user clears the Accumulated VI
•
During infusion via the View/Edit screen.This will reset the total volume infused
for all infusions associated with a specific patient to 0 mL.
> To c l e a r t h e A c c u m u l a t e d V I v a l u e d u r i n g i n f u s i o n :
1.
From the toolbar of the Running screen, press
View/Edit
.
2.
From the View/Edit screen, press
Clear Accum. VI
.
3.
From the Clear Accum. VI screen, press
Yes
to clear the Accumulated VI.
In addition to the Accumulated VI value, when using the Continuous
delivery mode, the View System screen also presents the
Accumulated Volume Infused via the primary line (Accum. Prim. VI)
and the Accumulated Volume Infused via the secondary line (Accu.
Sec. VI). The
View system function captures the date and time in
which the accumulated VI was last cleared.
The date and time in which the accumulated VI was cleared is
captured and can be viewed in the
View System menu.