________________________________________
Workspace Level 1 Training Workbook
10
Using the Keyhole Mounting Holes to Mount the MobiDock
1. Locate a secure mounting area, such as a stud and measure for the three
keyhole openings.
2. Install the appropriate screws for your wall, leaving 1/8th of an inch between the
head of the screw and the wall.
3. Slide the unit over the screws and allow it to move into place, securing the unit
to the wall.
4. Slide the unit up and out to remove it.
Using the Permanent Mounting Holes to Mount the MobiDock
1. Locate a secure mounting area, such as a stud and measure for the two
openings.
2. Place the unit in the appropriate location and mark the holes for mounting.
3. Remove the unit and drill two pilot holes where the markings are located.
4. Place the unit back in the marked location, and install the screws into the wall,
securing the unit to the wall.
Connecting Two Interwrite MobiDocks to Charge Simultaneously
You can use a double-headed charger to connect two MobiDocks, allowing you to
charge up to six Mobis and Mobi Learners at the same time with the same charger.
1. Take one end of the cord and connect it as you would with a single connection.
2. Repeat for the second unit.
3. Install the units next to each other, and near the same outlet.
4. Place the Mobis and Mobi Learners into the units to charge, as you would a
single unit.
Locking the Interwrite Mobi Dock
1. Make sure the Release Pad is in the
locked
position
.
Keyhole Mounting Holes
Permanent Mounting Holes
Summary of Contents for InterwriteWorkspace
Page 1: ......
