Eiki LC-XT6, Service Manual

Page: 51 / 286

-51-
Disassembly requires a 2.0mm or 2.5mm hex wrench and a screwdriver.
Optical Parts Disassembly
1 Shutter assy removal
Remove 2 screws-A (M4x6) to remove the shutter assy upward.
A A
Shutter assy
1 Shutter assy removal
2 Panel/Prism assy removal
2-1 Polarized glasse(OUT)/pre-polarized glasses removal
2-2 LCD panels removal
3 Polarized glass(IN)/Optical filter assy removal
3-1 Polarized glass(IN)/Optical filter mounting
4 Optical filter (LC-CS) removal
5 Integrator assy removal
6 PBS/Integrator(OUT) assy removal
7 Condenser lens assy removal
8 Relay lens assy removal
9 Optical unit top removal
9-1 Optical parts locations in the optical unit
10 Optical lamp unit top removal 10-1 Optical parts locations in the optical lamp unit
10-2 Mirror assy removal
10-3 Optical filters assy removal
Order of optical parts disassembly
Guides
Guides
Note on mounting the shutter assy
Mount the shutter assy on the panel/prisml assy
carefully to set the holes of the shutter assy onto
the guides of the panel/prism assy.
Shutter assy
Panel/prism assy