Eiki LC-XT6, Service Manual

Page: 25 / 286

-25-
Lens Mounting
- 2 -
The installation procedure and needed parts for lens installation varies on Optional Lens. Check the Part No. of the
Optional Lens and be sure to install or replace the lens by following the procedure below.
LENS REPLACEMENT AND INSTALLATION PROCEDURE
Fig. 3
3
Remove 2 Screws
A
. Slide the Top Cover
forward to take off. (See Fig. 3)
Focus Lens Lock Screw
Locate the Motor on right side.
Lens Attachment
Part No. (610 275 6029)
Connector
Lens Motor Lead
Fig. 2
Lens Attachment
Socket
1
Remove the safety lens cap on the front and
rear of the lens (mounting side). Insert the Lens
Attachment and secure with the four (4) screws
(supplied). (See Fig. 1)
Screw Driver
(supplied with the optional lens)
Fig. 1
Connect the Lens Motor Lead to the socket on
the top right of the Lens Attachment. (Motor
Driven Lens only) (See Fig. 2)
2
Turn off the projector, press the Main On/Off
Switch to Off and unplug the AC power cord
from the AC outlet.
A
A
Top Cover