5
7.
The maintenance kit contains all the tools and maintenance items needed to keep your Scuba in top
shape.
8.
The weighted sensor guard replaces the storage/calibration cup to protect the sensors during
deployment, and to help the Scuba sink.
1.2 Talk to your Scuba
Please follow the steps below to install the Scuba software on your PC or laptop (collectively, PC).
1
Plug the Scuba flash drive into one of your PC’s USB ports.
2
When the dialog box shown below opens, click
Install Scuba software
to upload the Scuba user interface software and
the USB driver software onto your PC.
Depending on which version of Windows you are accursed with, you might have to answer the usual questions about
your intention to load new software on your PC. Once you’re through with that, you’ll be returned to the same
screen that you started with, meaning that your Scuba software and USB driver are installed.
Click the
X
in the upper right corner of the dialog box to close the installation process.
This software installation process should take only a few minutes.
Please call us (+31 313 880 200) if you have any problems.
Flash
drive
